EOS EMOTEC B6000 Betriebsanweisung PDF herunterladen (Seite 15)

15GB

F 1

20:03

F 1

Programming fan operation

This control unit lets you operate a fan.

By factory default, "no fan operation" is

specified.

To program the fan function, first press the

"MODE" button to reach the programming

mode.

P1 then appears on the display.

P 1

P 4

without symbol = no fan operation

with symbol = fan operation

Programming current time

To reach this program level, press the

"MODE" button and the button simul-

taneously until F1 is displayed, as well as

the clock symbol.

You can change the time with function F1.

Confirm with the "MODE" button and the

previously set time begins to blink with the

clock symbol.

Set the current time using the and

buttons (e.g. when adjusting daylight-

savings time).

Confirm your selection by pressing and

holding the "MODE" button, until the

entered value begins to blink.

F1 briefly appears on the display, then the

unit returns to its default readout.

Press the

button repeatedly to reach

the program level P4. The fan symbol

appears on the display.

Confirm by pressing the "MODE" button.

A "0" appears on the display (no fan

operation). By pressing the button, you

can set a "1" (fan operation).

Confirm your selection by pressing the

"MODE"..button. On the display appears

shortly P4, then the unit returns to its default

readout and in set value "1" the fan symbol

appears on the display.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare